We developed Kapron insulation specifically for use with our Warmfloor elements because we needed the most efficient form of insulation with the minimum thickness of material.
In terms of heat - a 3mm Kapron board has the same insulation capacity as 350mm (approx 14 inches) of concrete.
An insulation layer of 6mm Kapron in a room should produce a temperature increase of up to 8 degrees C. at constant energy consumption.
Physical Properties
KAPRON K3 / PK3
KAPRON K6 / PK6
Thickness
3mm
6mm
Renk
White/Green
White / Green
Surface
Smooth
Smooth
Surface Coating
None
None
Size
80 cm x 125 cm
80 cm x 125 cm
Density
40 kg / m3
35-40 kg / m3
Thermal Conductivity
0,035 W / mk
0,035 W / mk
Thermal Penetration Value
0,086 m2 K / W
0,17 m2 K / W
Water Vapor Resistance
750
525
Water Absorption Property
None
None
Sound Insulation
16 db
17 db
Compression Resistance
0,1 N / mm2
0,1 N / mm2
Tensile Strength
1,3 N / mm2
0,9 N / mm2
Temperature range in use
From -60 0C to +70 0C
From -60 0C to +70 0C
Packaging
40 m2 (40 sheets) / Box
20 m2 (20 sheets) / Box
KAPRON is produced partially from recycled material and itself is 100% recycable so it is nature friendly.
Because of the production technique and the chemicals used in process KAPRON is CFC Free material so it is ozone friendly.
Because of its fine closed cell structure, KAPRON has neither water or vapor conductivity nor absorption property.
KAPRON has high pressure resistance so it does not deform easily.
Because of its low weight, it is easy to transport and apply.
KAPRON can be applied to any surface easily.
KAPRON can carry any cladding material easily because of their tensile strength capacity.
KAPRON does not consists any poisonous material, also can be used in food packaging sector.
