Heating Element Model:
Output Wattage (at 24 Vac):
7.8 W/ft (25.6 W/m) @ 68ºF (20ºC)
74 Ω/ft (23 Ω/m) @ 68ºF (20ºC)
Width: 34 cm
Length: Cut to Order
Thickness: 3/64" (1.2 mm)
WIRE SECONDARY: 2 x 1,5 or 2,5 mm2 red/black type RKUB or equal, depending on distance and load from heating element to transformer.
CONNECTING CLIPS: Crocodile clips for 2,5 mm2 wire. Crimped
on the element by special tool.
CONNECTING BOX: on bigger installation we often use a connection box to collect all the wires. From the box to the transformer we us a 6mm2 BASEC cable
TRANSFORMERS: Safety transformer with galvanic split circuit according to the SELV directives. Extra fuses for safety and normally equipped with Voltages from 20 to 28 V. Normally we trying to hide the transformer in a cupboard, stair case, or similar. We also put them outside in a enclosure box if necessary.
More technical info is available below in pdf form:
some are quite detailed & so they may take a little while to load & view (if you'd prefer them in another form, please just ask & we'll email them to you).
Just click the links to download. If you need a free PDF viewer you can get one HERE.
-Energy usage comparison chart
- Technical Comparison of Energy Efficiency